Removal - NEC Express5800/R120e-1M EXP291 User Manual

Chapter 2 Preparations
6. Slowly close the handle.
The tray is locked making a clicking sound.
7. Turn on the server, run BIOS Setup Utility, and then specify the boot order from Boot menu.
For details, see Chapter 2 (1. Details of System BIOS) in "Maintenance Guide"

1.18.2 Removal

To remove hard disk drive, reverse the installation procedure.
If you transfer or dispose of the removed hard disk drive, see Chapter 1 (1. Transfer, Movement, and Disposal)
in "Maintenance Guide" to erase data.
Turn on the server, start BIOS Setup Utility, and then specify the boot order from Boot menu.
For details, see Chapter 2 (1. Details of System BIOS) in "Maintenance Guide".
104
Note
When you push the drive into the slot, confirm the handle got hooked on the
frame.
Tips
The saved boot order is cleared when a hard disk drive is added.
Important
NEC assumes no liability for data leakage should the product be
transferred to a third party without erasing the data.
• If you remove a hard disk drive due to a failure, check the slot with its DISK LED
Note
lit in amber.
• Do not pull the slot out from the handle. Doing so may damage the handle.
Tips
The saved boot order is cleared when a hard disk drive is added.
Express5800/R120e-1M User's Guide
1. Installing Internal Optional Devices
DISK LED