NEC Express5800/R120e-1M EXP291 User Manual page 129

Chapter 3 Setup
2. BIOS Setup Utility (SETUP)
Password
If you have set a password, a message prompt you to enter password will be displayed from the next time.
Enter password [ ]
You can attempt password entry up to 3 times. If you entered a wrong password 3 times, operation stops.
(You cannot operate further.) Turn off the power.
Saving changes
If you finish configuration, select Save & Exit and then Save Changes and Exit to save changes and exit.
If you wish to exit without saving the changed parameters, select Save & Exit Discard Changes
and then
and Exit.
Or if you wish to restore the setting to default values, select Save & Exit Load Setup Defaults.
and then
(The default value might be different from the factory setting.)
129
Express5800/R120e-1M User's Guide