Starting And Stopping Projection; Turning The Power On And Projecting Images - Epson dreamio EH-R4000 User Manual

Starting and Stopping Projection

Turning the power on and projecting images

Connect the
power cable.
(included)
If there is a problem with projection even though the projector is set up and connected correctly,
refer to p.15, 54.
TIP
14
Remove the lens cover.
(commercially-
available)
Turn on the main
power switch.
ON
If you set the "Direct Power On" to "On", the power of the unit will turn on when
the main power switch is turned on, without having to press the power button of
the remote control or the projector's control panel.
The projector is equipped with the "Child Lock" function that prevents young
children from accidentally turning the power on and looking into the lens, and also
the "Control Panel Lock" function that prevents mis-operations is available.
When using the projector at an altitude of about 1500m or above, make sure
you set the "High Altitude Mode" to "On".
This projector is equipped with an automatic adjustment
function that automatically optimizes it when a computer
input signal is switched.
If a laptop computer or a computer with a LCD screen
has been connected to the projector, you may need to
use keyboard or function settings to change the output
destination. While holding down the
(the key with a symbol such as
selection is made, projection will soon start.
Computer's documentation
By setting "Standby Mode" to "On", you can turn the
projector on and off from a web browser on a networked
computer. (EH-R4000)
Turn the power on.
Control Panel
Turn the power on for the
connected equipment.
ON
p.43
key, press
/ on it). After the
p.42
Do not look into the
lens while projection
is in progress.
Remote Control
p.42
Example of output selection
NEC
Panasonic
SOTEC
HP
Toshiba
IBM
LENOVO
SONY
DELL
Fujitsu
Set mirror setting or
display detection.
Macintosh Depending on OS, you can
change the output
selection by pressing
p.42
.