Optional Accessories/Consumables; Installing And Removing The Cable Cover - Epson dreamio EH-R4000 User Manual

Optional Accessories/Consumables

The following optional accessories/consumables are available for purchase if required. This list of
optional accessories/consumables is current as of: 2010.7. Details of accessories are subject to change
without notice.
Varies depending on country of purchase.
■ Optional Accessories
50" Portable Screen
A compact screen which can be carried easily.
(Aspect Ratio 4:3)
60" Portable Screen
80" Portable Screen
100" Portable Screen
A portable roll-type screen. (Aspect 4:3)
VGA-HD15 PC Cable (1.8 m)
VGA-HD15 PC Cable (3 m)
VGA-HD15 PC Cable (20 m)
(For mini D-Sub 15-pin/mini D-Sub 15-pin)
Use to connect the projector to a computer.
Ceiling Mount*
(with ceiling plate)
Use when installing the projector to a ceiling.
■ Consumables
Lamp Unit
(1 spare lamp, 1 spare screwdriver)
Use as a replacement for spent lamps.

Installing and removing the cable cover

When the projector is suspended from a ceiling, you can use the cable cover to improve the
appearance.
Installing the cable cover
72
ELPSC06 Ceiling Pipe 600 (600 mm/white)*
Ceiling Pipe 450 (450 mm/white)*
Ceiling Pipe 700 (700 mm/white)*
Use when installing the projector to a high ceiling or
a ceiling with veneer panels.
ELPSC07
ELPSC08
ELPSC10
Cable Cover (Mat Black)
Cable Cover (White)
Use to cover cables of the projector that is suspended
from a ceiling to improve the appearance.
ELPKC02
ELPKC09
ELPKC10
ELPMB20
* A special method of installation is required in order
ELPMB22
to suspend the projector from the ceiling. Please
contact the place of purchase if you would like to
use this installation method.
ELPLP59 Air Filter Set
(1 air filter)
Use as a replacement for old air filters.
ELPCC03B (Black)
ELPCC03W(White)
Removing the cable cover
ELPFP07
ELPFP13
ELPFP14
ELPAF28