Setting Up Moviemate; Projection Distance And Image Size; Connecting The Power Cable And Turning The Power On - Epson MovieMate 25 User Manual

Setting Up MovieMate

Projection distance and image size

1
Place MovieMate in a position to project
the best size image onto the screen.
The further you place MovieMate away from the
screen, the larger the projected image becomes.
You can project on a wall if you want an image
larger than the size of the screen.
For detailed projection distance values, see
page 60.
You can adjust the position of the projected
image vertically and horizontally by using the
lens shift dial, as described on page 13.

Connecting the power cable and turning the power ON

1
Remove the lens cover.
2
Connect the power cable.
2
Position MovieMate so that it is parallel to
the screen.
If MovieMate is not parallel to the screen, the projected
image will be distorted.
3
Turn on the main power switch.
The Power button light and the Image Off
light turn orange.
Main power switch
Screen
11