Network" Menu (Eh-R4000 Only) - Epson dreamio EH-R4000 User Manual

"Network" menu (EH-R4000 only)

Network information
You can check the setting status for each network.
Projector Name
Displays the projector name used to identify the projector when connected to a Network.
DHCP
Shows whether DHCP is in use (On) or not in use (Off).
IP Address
Shows the IP address to be assigned to the projector.
Subnet Mask
Shows the subnet mask for the projector.
Gateway Address
Shows the gateway IP address for the projector.
MAC Address
Displays the MAC address.
Basic
Projector Name
Displays the projector name used to identify the projector when connected to a Network. When editing,
you can enter up to 16 single-byte alphanumeric characters.
PJLink Password
Set a Password to use when you access the projector using compatible PJLink software. You can enter up
to 32 single-byte alphanumeric characters.
Web Control Password
Set a password to use when making settings and controlling the projector using Web Control. You can
enter up to eight single-byte alphanumeric characters. Web Control is a computer function that allows
you to set up and control the projector by using the Web browser on a computer connected on a Network.
Wired LAN
DHCP
Set whether or not (On/Off) to use DHCP. If this is set to "On" you cannot set any more addresses.
IP Address
You can input the IP Address assigned to the projector. You can enter a number from 0 to 255 in each
field of the address. However, the following IP Addresses cannot be used.
0.x.x.x, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255)
Subnet Mask
You can input the subnet mask for the projector. You can enter a number from 0 to 255 in each field of
the address. However, the following Subnet Masks cannot be used.
0.x.x.x to 254.x.x.x, 255.255.255.255
Configuration Menu Functions
45