Soft keyboard operations
The Network menu contains items that require input of alphanumerics during setup. In this case,
the following software keyboard is displayed. Use
desired key, and then press v to enter the alphanumeric. After inputting, press [Finish] on the
keyboard to confirm your input. Press [Cancel] on the keyboard to cancel your input.
Each time the [CAPS] key is selected, it sets and changes between upper case and lower case
letters.
Each time the [SYM1/2] key is selected, it sets and changes the symbol keys for the section
enclosed by the frame.
"Reset" menu
Reset All
This resets all configuration menu settings to their default settings. The "Component" and "Language"
settings in the "Settings" menu and the "Memory" settings are not reset when the "Reset All" command
is used.
Settings for the "Network" menu are not reset when the "Reset All" command is used. (EH-R4000 only)
Reset Memory
This resets (erases) all settings that have been made using the "Save Memory".
Reset Lens Position
This resets (erases) all settings that have been made using the "Save Lens Position".
Reset Lamp Hours
Clear the cumulative lamp operating time and reset to "0H". Perform this procedure when you replace
the lamp.
Configuration Menu Functions
z x
K
or
to move the cursor to the
w y
47