Table of Contents
Advertisement
Basic Operations
Starting and Ending Projection
Turning on the Projector and Projecting
a
Connect the equipment to the
projector.
b
Connect the power cord.
Connect using the power cord supplied.
c
Remove the lens cap.
d
Turn on the connected equipment.
c
•
This projector provides a Child Lock function to prevent children from accidentally turning the power
on and a Control Panel Lock function to prevent accidental operations and so on.
Setting - Child Lock/Control Panel Lock
•
When using at an altitude of 1500 m or more, set High Altitude Mode to On.
High Altitude Mode
•
This projector provides an Auto Setup function to automatically select the optimum settings when the
input signal for the connected computer image changes.
•
This projector comes with a Trigger Out port to communicate the current status of the projector's
power (on/off) to external devices. When using this function, set Trigger Out.
Trigger Out
p.79
•
Do not attach the lens cap during projection.
•
If the projector is suspended from a ceiling, after removing the lens cap, make sure you keep it in a safe
place as you will need to attach it when transporting the projector.
p.79
p.79
24
e
Turn on the projector.
Remote control
c
When Direct Power On is set to
On, you can start projecting by
simply connecting the power cord
to the projector without having to
press any buttons.
Operation - Direct Power
On
p.79
Warning
Do not look into the lens during projection.
Caution
Do not disconnect the power cord from the main
projector unit or the electrical outlet during
projection.
Signal - Auto Setup
s
Control panel
Settings -
s
Settings - Lock
s
Settings - Operation -
s
p.77
Settings - Operation -
s
Advertisement
Table of Contents
