Using the Mail Notification Function to Report Problems
By setting the Mail Notification function from the projector's Configuration Menu, notification
messages will be sent to the preset email addresses when a problem or warning occurs with a
projector. This will enable the operator to be notified of problems with projectors even at locations
away from the projectors.
• Up to a maximum of three notification destinations (Addresses) can be recorded,
and notification messages can be sent to all three destinations at once.
• If a projector develops a critical problem and suddenly stops working, it may not be
TIP
able to send a message notifying an operator of the problem.
• Monitoring is possible if "Communication On" is set from the "Settings" menu of the
projector's Configuration Menu, even if the projector is in "Standby Mode".
Operating from a Computer (EH-R4000 Only)
p.30
53