Web Interface Operation; Navigating The Web Interface - Eaton Advanced Enclosure Power Distribution Unit (ePDU) User Manual

Chapter 7

Web Interface Operation

This chapter describes configuring and monitoring an Eaton Advanced Enclosure Power Distribution
Unit (ePDU) remotely through the ePDU Network Management Card Web interface. This chapter describes the
following:

Navigating the Web interface

l
Accessing the Web interface
l
Configuring administration settings
l
Configuring attributes
l
Configuring network access and control
l
Monitoring and managing the ePDU
l
Navigating the Web Interface
The ePDU Network Management Card Web interface is a graphical Web interface used to remotely monitor or
configure the ePDU (see Figure 56). This section describes the functions provided by this interface.
Menu
Bar
Active
Alarm
Main
Application
Page
Figure 56. Navigating the Web Interface
NOTE 1 The Web interface language is not configurable. Only English is provided.
NOTE 2 The data that displays on the Web interface depends on the ePDU model you are
using. The examples shown represent typical data displays reported from a single
model.
NOTE 3 The Web interface supports Microsoft Internet Explorer 6.0 and greater, Firefox 3.6
and greater, and Google Chrome 4 and greater.
Page Title Tab Application Header Bar
Menu Selection Display
Host Window
Refresh Bar Alarm Notification
Eaton Advanced ePDU User's Guide P-164000042—Rev 1 www.eaton.com/ePDU
ePDU and Network Management
Card Identification Data
68