Menu And Status Display; Lcd Window - Eaton Advanced Enclosure Power Distribution Unit (ePDU) User Manual

Menu and Status Display

The LCD provides information in English about the ePDU and connected devices using white text on a blue
background. The LCD window flashes orange when any alarm is active.
Basic configuration of some settings is available through the LCD. Full configuration of all settings is available
through the remote interfaces. For more information about configuration, see Chapter 4, "Network
Communication Configuration" on page 26.

LCD Window

The LCD has three modes:
Screensaver mode (startup screen)
l
Screensaver mode cycles through a set sequence of screens that display the following information:
- ePDU frequency, power, and current
- Phase power and current (for three-phase models)
- Outlet group power and current
- Environmental measurements (with the optional EMP installed)
Settings mode (LCD main menu)
l
The menus that display depend on your ePDU model. For more information about the menus and settings
for your model, refer to Chapter 6, "LCD Operation" on page 57.
Energy Saving mode (dark screen)
l
Turning the backlight off conserves energy but darkens the screen. Pressing any of the navigation buttons
turns the backlight on. An active alarm also turns the backlight on. The LCD automatically turns off after 15
minutes if no button is pressed.
Figure 30 shows the LCD window and navigation buttons.
Figure 30. LCD Window and Navigation Buttons
Eaton Advanced ePDU User's Guide P-164000042—Rev 1 www.eaton.com/ePDU
Operation Overview
40