Code 93; Enable/Disable Code 93; Set Lengths For Code 93 - Motorola Symbol LS4278 User Manual

Code 93

Enable/Disable Code 93

To enable or disable Code 93, scan the appropriate bar code below.
Enable Code 93

Set Lengths for Code 93

The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s) the code contains.
Set lengths for Code 93 to any length, one or two discrete lengths, or lengths within a specific range.
• One Discrete Length - Select this option to decode only Code 93 symbols containing a selected length. Select the length
using the numeric bar codes in
characters, scan Code 93 - One Discrete Length, then scan 1 followed by 4. To correct an error or to change the
selection, scan Cancel on page D-4.
• Two Discrete Lengths - Select this option to decode only Code 93 symbols containing either of two selected lengths.
Select lengths using the numeric bar codes in
symbols containing either 2 or 14 characters, select Code 93 - Two Discrete Lengths, then scan 0, 2, 1, and then 4.
To correct an error or to change the selection, scan Cancel on page D-4.
• Length Within Range - Select this option to decode a Code 93 symbol with a specific length range. Select lengths
using the numeric bar codes in
between 4 and 12 characters, first scan Code 93 - Length Within Range. Then scan 0, 4, 1, and 2 (single digit numbers
must always be preceded by a leading zero). To correct an error or change the selection, scan Cancel on page D-4.
• Any Length - Scan this option to decode Code 93 symbols containing any number of characters within the scanner's
capability.
Appendix D, Numeric Bar Codes. For example, to decode only Code 93 symbols with 14
Appendix D, Numeric Bar
Appendix D, Numeric Bar Codes.
*
Disable Code 93
Codes. For example, to decode only those Code 93
For example, to decode Code 93 symbols containing
Symbologies 13-27