2-8
Symbol LS4278 Product Reference Guide
Scanning in Hands-Free Mode
The optional Intellistand adds greater flexibility to scanning operation. When the scanner is seated in the stand's "cup," the scanner's
built-in sensor places the scanner in hands-free mode. When the scanner is removed from the stand, it automatically switches modes
to operate in its normal hand-held triggered mode.
While in Intellistand, the scanner enters low power mode (Intellistand Idle Timeout) when no bar code is decoded within 15 minutes.
See
Intellistand Idle Timeout on page 5-7
When the scanner enters Intellistand Idle Timeout (low power mode in the stand), scanning capability
suspends. To restart scanning capability, press the trigger or remove the scanner and replace it into the stand.
Assemble the Stand
to set timeout intervals.
Figure 2-5. Assembling Intellistand