Enable/Disable Code 93 - Motorola LS3578 Product Reference Manual

11 - 28 LS3578 Product Reference Guide
Code 93

Enable/Disable Code 93

To enable or disable Code 93, scan the appropriate bar code below.
Set Lengths for Code 93
The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s)
the code contains. Lengths for Code 93 may be set for any length, one or two discrete lengths, or lengths within a
specific range.
One Discrete Length - This option allows the scanner to decode only those Code 93 symbols containing a
selected length. Lengths are selected from the numeric bar codes in
example, to decode only Code 93 symbols with 14 characters, scan Code 93 - One Discrete Length, then scan 1
followed by 4. In case of an error, or to change the selection, scan Cancel on
Enable Code 93
*
Disable Code 93
Code 93 - One Discrete Length
Appendix D, Numeric Bar Codes. For
page D-3.