Table of Contents
Advertisement
Code 93
Enable/Disable Code 93
To enable or disable Code 93, scan the appropriate bar code below.
Set Lengths for Code 93
The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s)
the code contains. Set lengths for Code 93 for any length, one or two discrete lengths, or lengths within a specific
range.
One Discrete Length - Select this option to decode only Code 93 symbols containing a selected length. Select the
length using the numeric bar codes in
symbols with 14 characters, scan Code 93 - One Discrete Length, then scan 1 followed by 4. In case of an error,
or to change the selection, scan Cancel on
Enable Code 93
*
Disable Code 93
Appendix D, Numeric Bar
page
D-3.
Code 93 - One Discrete Length
Codes. For example, to decode only Code 93
Symbologies 12 - 25
Advertisement
Table of Contents
