Scan Pattern - Motorola Symbol LS4278 User Manual

Hide thumbs Also See for Symbol LS4278:
Table of Contents

Advertisement

5-10
Symbol LS4278 Product Reference Guide

Scan Pattern

This parameter determines the pattern (mode) of scanning. Scan the appropriate bar code below to set the scanning mode.
• Single-line Only - Scan Single-line Only for a single-line scan mode. The laser has no up and down scan line movement
(no raster). (For an example of a single-line scan, see
• Multi-line Smart Raster - Scan Multi-line Smart Raster for a scan line begins as a single line and moves up and down
(rasters) when a partial scan of a bar code is detected, or no bar code is decoded 500 ms after the trigger is pulled. Upon
seeing a stacked GS1 DataBar code, the scanner immediately rasters. (For an example of a multi-line scan, see
on page
2-6.)
• Multi-line Always Raster (default) - Scan Multi-line Always Raster for rastering (up and down scan line movement) to
begin immediately.
Single-line Only
(No Raster)
*
Multi-line Always Raster
Figure 2-2 on page
2-6.)
Multi-line Smart Raster
Figure 2-3

Hide quick links:

Advertisement

Table of Contents

Troubleshooting

loading

This manual is also suitable for:

Ls4278Stb4278

Table of Contents