Canon SX6 User Manual page 35

Before connecting cables, turn off both the projector and computer.
It may project an image inappropriately when projecting the digital PC signal in 1280 x 1024
or 1400 x 1050 depending on the type of computer or DVI cable (SX7/SX6/SX60).
The USB terminal is used to use the remote control as the computer mouse. An image can-
not be projected simply by connecting the USB cable.
DVI cable
To monitor output terminal
(DVI terminal)
Optional DVI digital cable
[LV-CA29]
Input Terminal-1
(DIGITAL IN)
Input Signal: Select [DIGITAL PC] or
[ANALOG PC-1] (P46)
Computer
Projector
5-BNC cable
To monitor output terminal
(5-BNC output terminal)
Commercial 5-BNC
cable (for 5-BNC/
mini D-Sub 15-pin)
Input Terminal-2
(ANALOG IN-2)
Input Signal: Select [ANALOG PC-2] (P48)
Computer
Extension cable
Commercial 5-BNC
extension cable
Projector
35