Registering A Password; Resetting To The Default Setting; Factory Defaults - Canon SX6 User Manual

Registering a Password

[Register password]
DIGITAL PC
DIGITAL VIDEO COMP./SCART VIDEO/S-VIDEO
You can register a password that you need to
enter when turning on the projector.
System settings
Other settings
Register password
Press the [OK] button to display the password
entry screen.
Enter a 4-digit password from the left. You can
enter a value 1, 2, 3, and 4 by pressing [ ], [ ],
[<], and [>], respectively. Once you enter a
value for all four digits, the password is regis-
tered automatically.
Press the [MENU] button without
entering a password if you want to
cancel registering the password.
ANALOG PC

Resetting to the Default Setting

[Factory defaults]

DIGITAL PC
DIGITAL VIDEO COMP./SCART VIDEO/S-VIDEO
You can reset the menu item settings and restore
the system settings to the factory defaults.
System settings
Other settings
Factory defaults
Resets the projector's menu item
OK
settings.
Cancels resetting the menu item
Cancel
settings.
Press the [OK] button to confirm, and then press
the [MENU] button.
All adjustments are reset to default if
you perform [Factory defaults].
The language selection screen
appears when you turn on the projec-
tor for the next time if you perform
[Factory defaults] (P39).
The settings of [Lamp counter],
[Language] and [Remote control] will
not be reset even after resetting to the
factory defaults.
For the factory defaults, see P140,
141.
Setting Various Function
ANALOG PC
113