Projecting An Image From Av Equipment; Connecting The Projector To An Av Equipment - Canon SX6 User Manual

Projecting an Image from AV Equipment

Connecting the Projector to an AV Equipment

Connect the projector and AV equipment.
Connecting to Video Terminals
Supplied component cable
Connecting to the RCA
component terminal
(RCA component terminal)
Commercial
component cable
(RCA x 3)
Supplied
component cable
(RCA/Mini D-sub
15-pin)
INPUT Signal: [COMPONENT] is selected automatically
Before connecting cables, turn off both the projector and AV equipment.
The above illustrations are just examples. For more detailed information, refer to the manual
for the connecting AV equipment.
About the Component Cable
The projector cannot be connected to an AV equipment only with the supplied component
cable (RCA/Mini D-sub 15-pin). Please purchase either of the following cables according to the
type of the terminal on the AV equipment:
RCA terminal: RCA x 3/RCA x 3 cable
D-terminal:
62
AV equipment
Video output terminal
Connect the RCA
cables according
to color code.
Projector
D-terminal/RCA x 3 cable
Connecting to the D terminal
(D terminal)
Green (Y)
Blue (Cb/Pb)
Red (Cr/Pr)
Component input terminal
(ANALOG IN-2)
Commercial
component cable
(D terminal/RCA x 3)
Supplied
component cable
(RCA/Mini D-sub
15-pin)