Starting Projection - Canon SX6 User Manual

Hide thumbs Also See for SX6:
Table of Contents

Advertisement

Starting Projection

Connect the power cord and turn on the projector to start the projection.
Once the projector is turned off, it cannot be turned on for a while. Wait until the lamp is
cooled down and the [POWER] indicator lights in red.
Connect the Ground Terminal
Connect the ground terminal on the power plug to ground. Otherwise, the operating
computer may suffer electromagnetic radiation problems and poor reception by TV and
Caution
radio.
Unplug the Power Cord When the Projector is Not in Use
The projector constantly consumes approximately 7W power even when it is turned off.
To ensure safety, malfunction prevention, and power saving, remove the power plug
from the AC outlet when the projector is not used for an extended period of time.
1
Connect the power cord.
Fully insert the power cord plug into the socket.
The [POWER] indicator flashes red.
2
Press the [POWER] button.
The [POWER] indicator flushes green, and
then lights in green.
38

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sx7Sx60X700

Table of Contents