Panasonic VQT1T63 Operating Instructions Manual page 97

Note
When using a memory card, [3:2] cannot be selected in motion picture mode. When using the
•
built-in memory, [16:9] and [3:2] cannot be selected in motion picture mode.
Refer to P206 for information about the available recording time.
•
The available recording time displayed on the screen may not decrease regularly.
•
Depending on the type of the card, the card access indication may appear for a while after
•
recording motion pictures. This is not a malfunction.
Motion pictures can be recorded continuously up to 2 GB. The maximum available recording
•
time for up to 2 GB only is displayed on the screen.
(DMC-LX3PL/DMC-LX3SG/DMC-LX3GC/DMC-LX3GJ)
Motion pictures can be recorded continuously for up to 15 minutes. Also, continuous recording
•
exceeding 2GB is not possible. (Example: [10m 30s] with [
Remaining time for continuous recording is displayed on the screen.
(DMC-LX3EG/DMC-LX3E)
When motion pictures recorded with the camera are played back on other equipment, the
•
quality of the picture and sound may deteriorate and it may not be possible to play them back.
Also the recording information may not be displayed correctly.
LUMIX model sold after August 2008 has made audio improvement, so it cannot be played
•
back on the previous models.
This unit does not support recording motion pictures on MultiMediaCards.
•
In motion picture mode, the following functions cannot be used.
•
[š] and [ ] in [AF MODE]
–
Direction detection function
–
Review
–
[MODE2] and [AUTO] on the optical image stabilizer function
–
Advanced (Recording pictures)
- 97 -
])