Panasonic VQT1T63 Operating Instructions Manual page 34

} [SCENE MENU]
[VERSION DISP.] It is possible to check which version of firmware is on the camera.
[FORMAT]
Use a battery with sufficient battery power or the AC adaptor (optional) when formatting. Do not
•
turn the camera off during formatting.
If a card has been inserted, only the card is formatted. To format the built-in memory, remove
•
the card.
If the card has been formatted on a PC or other equipment, format it on the camera again.
•
It may take longer to format the built-in memory than the card.
•
If the built-in memory or the card cannot be formatted, consult your nearest Service Centre.
•
Preparation
Set the screen that will appear when a scene mode has been
selected.
[OFF]: The recording screen in the currently selected scene
mode appears.
[AUTO]: The [SCENE MODE] menu screen appears.
The built-in memory or card is formatted.
Formatting irretrievably deletes all the data so check the data
carefully before formatting.
- 34 -