Panasonic VQT1T63 Operating Instructions Manual page 199

The picture does not appear on the television.
Is the camera connected to the TV correctly?
•
> Set the TV input to external input mode.
Output from the [COMPONENT OUT] socket is not possible when it is connected to the PC or
•
the printer.
> Connect it only to the TV.
The display areas on the TV screen and the camera's LCD monitor are different.
Depending on the TV model, the pictures may be extended horizontally or vertically or they
•
may be displayed with their edges cut off.
The motion pictures cannot be played back on a TV.
Are you trying to play back the motion pictures by directly inserting the card in the card slot of
•
the TV?
> Connect the camera to the TV with the AV cable (supplied), or with the component cable
(DMW-HDC2; optional), and then play back the motion pictures on the camera. (P165,
The picture is not displayed fully on the TV.
> Check [TV ASPECT] setting.
Others
TV, PC and printer
(P33)
- 199 -
167)