The LCD monitor is too bright or dark.
> Adjust the brightness of the screen.
[POWER LCD] is activated.
•
The picture is not displayed on the LCD monitor.
Is the [EXT. VIEWFINDER]
•
> Press [DISPLAY] to switch to the LCD monitor.
Black, red, blue and green dots appear on the LCD monitor.
This is not a malfunction.
•
These pixels do not affect the recorded pictures.
Noise appears on the LCD monitor.
In dark places, noise may appear to maintain the brightness of the LCD monitor. This does not
•
affect the pictures you are recording.
The flash is not activated.
Is the flash closed?
•
> Open the flash by sliding [
Flash mode is not available when auto bracket
•
The flash is activated multiple times.
The flash is activated twice when red-eye reduction
•
Is it set to [FLASH BURST]
•
Others
(P29)
(P29)
(P126)
set to [ON]?
Flash
‰
OPEN].
(P59)
(P70)
(P91)
in scene mode?
- 196 -
or burst have been set.
(P60)
has been set.