Panasonic VQT1T63 Operating Instructions Manual page 200

The picture cannot be transferred when the camera is connected to a PC.
Is the camera connected to the PC correctly?
•
Is the camera recognised by the PC correctly?
•
> Set to [PC] in [USB MODE]. (P33,
The card is not recognised by the PC. (The built-in memory is recognised.)
> Disconnect the USB connection cable. Connect it again while the card is inserted in the
camera.
The picture cannot be printed when the camera is connected to a printer.
Pictures cannot be printed using a printer which does not support PictBridge.
•
> Set to [PictBridge(PTP)] in [USB MODE]. (P33,
The ends of the pictures are cut at printing.
> When using a printer with a trimming or borderless printing function, cancel this function
before printing. (For details, refer to the operating instructions for the printer.)
> When you order photo studios to print pictures, ask the photo studio if the pictures can be
printed with both ends.
Others
156)
159)
- 200 -