Panasonic VQT1T63 Operating Instructions Manual page 111

∫ Setting the white balance manually
1 Select [ ] or [
1
2 Aim the camera at a sheet of white paper etc. so that the
frame in the centre is filled by the white object only and then
press [MENU/SET].
∫ Finely adjusting the white balance [
You can finely adjust the white balance when you cannot acquire the desired hue by
setting the white balance.
You can set from the quick menu.
•
1 Select [WHITE BALANCE] and then press 1.
Press 1 again if
•
2 3/4/2/1 to adjust the white balance and then
Press
press [MENU/SET].
2 : A (AMBER: ORANGE)
1 : B (BLUE: BLUISH)
3 :
G _ (GREEN: GREENISH)
4 :
M ` (MAGENTA: REDDISH)
Note
If you finely adjust the white balance to A (amber), the white balance icon on the LCD monitor
•
will change to orange. If you finely adjust the white balance to B (blue), the white balance icon
on the LCD monitor will change to blue.
If you finely adjust the white balance to G_ (green) or M` (magenta), [_] (green) or [`]
•
(magenta) appears beside the white balance icon on the LCD monitor.
Select the centre point if you are not finely adjusting the white balance.
•
The white balance fine adjustment setting is reflected in the picture when using the flash.
•
You can finely adjust the white balance independently for each white balance item.
•
The white balance fine adjustment setting is memorised even if the camera is turned off.
•
The white balance fine adjustment level returns to the standard setting (centre point) in the
•
following cases.
When you reset the white balance in [
–
When you reset the colour temperature manually in [
–
Advanced (Recording pictures)
] and then press 1.
2
(P27)
[ ], [ ]
1 2 or [
1
- 111 -
]
] is selected.
] or [ ]
2
]