Panasonic VQT1T63 Operating Instructions Manual page 64

Note
Do not bring the flash too close to objects or close the flash while it is activated. The
•
objects may be discoloured by its heat or lighting.
Do not close the flash soon after the flash is activated prior to taking pictures due to AUTO/
•
Red-eye reduction etc. It causes a malfunction.
When you take a picture beyond the available flash range, the exposure may not be adjusted
•
properly and the picture may become bright or dark.
When the flash is being charged, the flash icon blinks red, and you cannot take a picture even
•
when you press the shutter button fully.
The white balance may not be properly adjusted if the flash level is insufficient for the subject.
•
When the shutter speed is fast, the flash effect may not be sufficient.
•
It may take time to charge the flash if you repeat taking a picture. Take a picture after the
•
access indication disappears.
The red-eye reduction effect differs between people. Also, if the subject was far away from the
•
camera or was not looking at the first flash, the effect may not be evident.
When the [CONVERSION]
•
When the external flash is installed, it will be prioritized. See
•
external flash.
Advanced (Recording pictures)
(P127) is set to [ ], the flash is fixed to [Œ].
- 64 -
P173 for more information on the