Panasonic VQT1T63 Operating Instructions Manual page 19

3
1:Close the card/battery door.
2:Slide the release lever in the direction
of the arrow.
If the card/battery door cannot be completely
•
closed, remove the card, check its direction and
then insert it again.
Note
Remove the battery after use. Store the removed battery in the battery carrying case (supplied).
•
Do not remove the battery until the LCD monitor and the status indicator (green) turn off as the
•
settings on the camera may not be stored properly.
The supplied battery is designed only for the camera. Do not use it with any other equipment.
•
Before removing the card or battery, turn the camera off, and wait until the status indicator has
•
gone off completely. (Otherwise, this unit may no longer operate normally and the card itself
may be damaged or the recorded pictures may be lost.)
Preparation
- 19 -