Panasonic VQT1T63 Operating Instructions Manual page 30

[GUIDE LINE]
The [PATTERN] setting is fixed to [
•
[HISTOGRAM]
[HIGHLIGHT]
If there are any white saturated areas, we recommend
•
compensating the exposure towards negative
referring to the histogram
picture again. It may result in a better quality picture.
There may be white saturated areas if the distance
•
between the camera and the subject is too close when
taking pictures with the flash.
If [HIGHLIGHT] is set to [ON] in this case, the area
directly illuminated by the photo flash will become white saturated and appear blinking in black
and white.
Preparation
Set the pattern of the guide lines displayed when taking pictures.
You can also set whether or not to have the recording information
displayed when the guide lines are displayed.
[REC. INFO.]:
[OFF]/[ON]
] in the Intelligent auto mode.
This allows you to set either to display or not display the
histogram. (P56)
[OFF]/[ON]
When the auto review or review function is activated, white
saturated areas appear blinking in black and white.
[OFF]/[ON]
(P57) and then taking the
- 30 -
[PATTERN]:
[ ]/[
[ON]
(P69)
(P56)
]
[OFF]