Panasonic VQT1T63 Operating Instructions Manual page 104

∫ Adjusting each film mode to the desired setting
1 Press 2/1 to select a film.
2 Press 3/4 to select an item and 2/1 to adjust.
Registered settings are memorised even if the camera is turned off.
•
3 Press 3/4 to select [MEMORY], and press [MENU/SET].
4 Press 3/4 to select an item, and then press [MENU/SET].
You can register 2 settings. ([MY FILM 1] and [MY FILM 2])
•
(After registering, the film mode name that was registered
previously is displayed.)
[STANDARD] is registered in [MY FILM 1] and [STANDARD] (
•
is registered in [MY FILM 2] at the time of purchase.
5 Press [MENU/SET] to close the menu.
You can also press the shutter button halfway to close the menu.
•
[CONTRAST]
[SHARPNESS]
[SATURATION]
[NOISE REDUCTION]
Advanced (Recording pictures)
Increases the difference between the brightness and the
[_]
darkness in the picture.
Decreases the difference between the brightness and the
[`]
darkness in the picture.
[_] The picture is sharply defined.
[`] The picture is softly focused.
[_] The colours in the picture become vivid.
[`] The colours in the picture become natural.
The noise reduction effect is enhanced. Picture
[_]
resolution may deteriorate slightly.
The noise reduction effect is reduced. You can obtain
[`]
pictures with higher resolution.
- 104 -
)
B W
&