Using The Timer - Mitsubishi Electric MJ-E20TX-H Instruction Manual

Using the Timer

OFF timer operation
2
To set
1
Switch the power on.
2
Select operating mode.
Select desired operating mode.
3
Change the louvre swing direction.
Select the desired setting.
4
Set the operating time.
Short
beep
¡ When pressed once the figure [ ]
and [OFF] appear.
¡ Each subsequent press changes the
display in order from 1 to 9 hours.
(Hold the button to run automatically
through the numbers.)
No Display
Short
(LOW mode)
beep
➝ The OFF timer is set.
The following is an example of a display
indicating AUTO dehumidifying (set to
60%), swing set to WIDE and the OFF
timer set for 2 hours.
¡ The time remaining until the unit switches
itself off is indicated in increments of one
hour with a flashing numeral.
¡ When the set time is reached, the unit switches
itself off and the louvre closes automatically.
¡ The internal drying mode starts if set.
18
3 4 2 1
12
13~15
Press
Short Short
beep beep
17
The OFF timer can be set for 1 to 9 hours.
Set the timer when the power is switched on.
To cancel
<When you want to turn the unit
off>
Press the POWER button. (Power off)
16
¡ The OFF Timer is cancelled.
<When you want to disable the
Timer OFF mode, and continue
operation>
Keep pressed until the remaining time display
disappears. The unit returns to LOW mode.
Short
beep
¡ The OFF Timer is cancelled.
∞ Empty the water tank before operating. The unit
stops and the Tank full lamp lights if the tank
becomes full during operation.
∞ The OFF timer and ON timer cannot be set at
the same time.
∞ Do not use timer OFF mode in conjunction with
LAUNDRY or MIDEW GUARD.
∞ The OFF timer cannot be set during internal
drying.
Long
beep
Press
Press