Power Button; Information Display - Mitsubishi Electric MJ-E20TX-H Instruction Manual

¡Air purifier lamp
Lights during air purifier only
operation
¡Air purifier button
Switches to air purifier only
operation
¡Information display
Indicates room and unit
condition
Low Temperature
Indicator
The indicator comes on if the
room temperature drops below
15°C.
Activating Low Temp mode is
recommended.
14
¡Tank full light
This lights up to warn that
the water tank is full.
¡Drying inside lamp
Flashes during internal
drying operation
¡Drying inside switch
Activate/deactivates
internal drying
15
¡Power lamp
Lights when unit is ON.
¡Power button
Use this to switch the
unit ON and OFF.
12
DEFROST Indicator
Airflow (dehumidifying) will stop and the frost
that has accumulated inside will be melted
and dropped into the tank when the
indicator is on.
Please wait a moment as operation will
resume in around 5 minutes.
While in DEFROST mode, airflow
(dehumidifying) and the louvre will stop.
The sounds coming from the unit will also
change.
DEFROST will start automatically when room
temperature drops below 15°C (This may be
as often as once every 40 minutes).
12
You can select from 8 operating modes
¡EASY
DEHUMIDIFYING
¡LAUNDRY
¡HIGH
¡LOW
¡MILDEW GUARD
17
¡LOW TEMP
¡AUTO
¡AIR PURIFIER
All modes
include
dehumidifier
and air purifier
functions.
Air purifier only
operation. The
dehumidifier
function is
disabled.
High humidity
warning
The indicator flashes when
the humidity in the room
exceeds 75%.
Activating the dehumidifier is
recommended when the
indicator is flashing.
If the High humidity warning is
not used, remove the power
plug from the power socket.
9