Easy Operation; Easy Dehumidifying - Laundry - Mitsubishi Electric MJ-E20TX-H Instruction Manual

Easy operation

The unit automatically monitors room temperature/humidity alleviating the necessity to make minor adjustments. Use
EASY DEHUMIDIFYING for dehumidifying a room and LAUNDRY for drying clothes.
Short
beep
¡ EASY DEHUMIDIFYING
The unit operates intermittently controlling
the airflow to remove the damp feeling in
the air. (There is no need to set the humidity
level)
When the room temperature is high, the
blower operates to decrease the damp
feeling.
The airflow or louvre operation may stop
according to the humidity level.
60
50
20
0
Room temperature is
below 27°C - the unit
automatically sets the
humidity level
according to the
temperature.
∞ Pressing HUMIDITY SELECTION switch while in EASY DEHUMIDIFYING or LAUNDRY modes
Information
changes the mode to AUTO.
Changes with every press
Press
Room
temperature
27 30
(°C)
Room temperature is
above 27°C - the unit
lowers the humidity
level to 50%, then
activates the blower.
The dehumidifier is
reactivated when
humidity rises to 60%.
15
¡Selected mode lamp lights
¡ LAUNDRY
The unit automatically stops about the time the
clothes dry. (There is no need to set the operating
time according to the amount of washing)
The unit operates up to 12 hours.
∞ The following conditions may stop the unit before
the clothes are dry:
Please start operations again.
¡ When the tank is full. (Empty the water tank
before operating the unit).
¡ When used in conjunction with the OFF
Timer mode (Do not use in conjunction with
the OFF timer mode.)
∞ The unit stops after one hour when the
room temperature is below 5°C.
When the temperature is low, the humidity
level does not change much because the
moisture from washing does not evaporate
well. Use a heater to raise the room
temperature to around 16°C.
∞ The following conditions prevent clothes
from drying well:
Room temperature below 15°C, large volume
of laundry; laundry not spaced well; clothes of
thick fabric and spacious room.
3
13