Air Purifier - Mitsubishi Electric MJ-E20TX-H Instruction Manual

AUTO
When you want to set the humidity level.
Short
Press
beep
¡Frame appears around selected mode
The MODE button can be used to select AUTO.
¡ AUTO
The unit maintains the humidity level by
automatically controlling airflow and
operating intermittently as necessary. All
you have to do is set the humidity level.
¡ The unit turns off when current humidity
decreases past the set humidity level, and
restarts when the level is exceeded.
¡ The unit operates for 6 minutes continuously
regardless of the humidity level immediately
after turning the power on.
Frequent use of exits and room
size/conditions may cause the humidity to not
reach the set level.
<To view set humidity level/ To set
humidity level>
¡ Pressing the button once
displays the set humidify level
with the
seconds, the
Press
display returns to
the current
humidity display.
¡ Pressing HUMIDITY
SELECTION while
is displayed sets the humidity
level. Each time the button is
Press pressed, the humidity setting
changes.
again
70
indicator. After 3
65 60 55 50

AIR PURIFIER

To operate only the air purifier.
Short
beep
¡Air purifier lamp lights
To return to the previous mode, press the air
purifier button again.
¡ AIR PURIFIER
The unit cleans the air by passing it
through the photocatalytic filter. The
dehumidifying function is disabled.
∞ The air passes through the photocatalytic
filter in all modes, cleaning the air even if
the air purifier lamp is not lit.
∞ Cigarette smoke and toxins found in smoke,
such as carbon monoxide, cannot be
removed with this filter.
Press
15