Related Manuals for Clarke CRS350M
Summary of Contents for Clarke CRS350M
- Page 1 MINI RECIPROCATING SAW MODEL NO: CRS350M PART NO: 6462550 OPERATION & MAINTENANCE INSTRUCTIONS LS1112...
- Page 2 INTRODUCTION Thank you for purchasing this CLARKE Mini Reciprocating Saw. Before attempting to use this product, please read this manual thoroughly and follow the instructions carefully. In doing so you will ensure the safety of yourself and that of others around you, and you can look forward to your purchase giving you long and satisfactory service.
-
Page 3: General Power Tool Safety Warnings
GENERAL POWER TOOL SAFETY WARNINGS WARNING: READ ALL INSTRUCTIONS. FAILURE TO FOLLOW ALL INSTRUCTIONS LISTED BELOW MAY RESULT IN ELECTRIC SHOCK, FIRE AND/ OR SERIOUS INJURY. THE TERM “POWER TOOL” IN THE WARNINGS REFERS TO YOUR MAINS-OPERATED (CORDED) POWER TOOL OR BATTERY- OPERATED (CORDLESS) POWER TOOL. - Page 4 b. Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries. c. Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool.
-
Page 5: Additional Warnings For Reciprocating Saws
5) SERVICE a. Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. ADDITIONAL WARNINGS FOR RECIPROCATING SAWS 1. ALWAYS use the appropriate blade for the material being cut. 2. -
Page 6: Electrical Connections
ELECTRICAL CONNECTIONS WARNING: READ THESE ELECTRICAL SAFETY INSTRUCTIONS THOROUGHLY BEFORE CONNECTING THE PRODUCT TO THE MAINS SUPPLY. This product battery charger is provided with a standard 13 amp, 230 volt (50Hz), BS 1363 plug, for connection to a standard, domestic electrical supply. Should the plug need changing at any time, ensure that a plug of identical specification is used. -
Page 7: Operation
BEFORE USE FITTING THE BLADE WARNING: BEFORE REMOVING, OR INSTALLING A BLADE, MAKE SURE THAT THE MAINS PLUG HAS BEEN REMOVED FROM THE MAINS SUPPLY. 1. Twist and hold the Blade holder open. 2. Insert the blade as far as possible into the holder with the blade teeth facing downwards. -
Page 8: To Stop The Saw
TO STOP THE SAW 1. Release the trigger when not using the trigger lock feature. If using the trigger lock function, press and release the trigger. WARNING: THE BLADE WILL CONTINUE TO RUN FOR A SHORT PERIOD AFTER THE TRIGGER HAS BEEN RELEASED WAIT UNTIL IT STOPS BEFORE REMOVING IT FROM THE WORKPIECE. -
Page 9: Cutting Metal
• Keep the handle clean and free from oil and grease. • Resin and glue on the blade causes poor cutting results. Clean the blade after use. • Refer to your CLARKE dealer if internal maintenance is required. Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com... -
Page 10: Replacement Blades
REPLACEMENT BLADES Replacement blades are available from your CLARKE dealer. Please quote the following part numbers: Type Part number Metal cutting blades (5 pk) 6462029 Wood cutting blades (5 pk) 6462028 SPECIFICATIONS MODEL CRS350M Voltage 230 V AC @ 50Hz... -
Page 11: Declaration Of Conformity
DECLARATION OF CONFORMITY Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com...
Need help?
Do you have a question about the CRS350M and is the answer not in the manual?
Questions and answers