Display Menu Screen - JVC GY-DV300 Instruction Manual

MENU SCREEN

DISPLAY Menu Screen

The DISPLAY Menu Screen consists of two screens (1/2 Screen and 2/2 Screen).
DISPLAY [1/2] Menu Screen
Item
● OFF
ZEBRA
LCD
BRIGHTNESS
LCD COLOUR
LCD PEAKING
VF
BRIGHTNESS
VF COLOUR
VF PEAKING
NEXT PAGE
PAGE BACK
DISPLAY [2/2] Menu Screen
Item
● ON
TAPE REMAIN
● ON
TIME CODE
E-94
Contents of Menu Screens (cont'd)
Set Value
Selects whether zebra patterns should be shown on the LCD
70 – 80% screen and the viewfinder screen, and sets the luminance level
85 – 95% of the subject areas where the zebra pattern is displayed
OVER 95% OFF: Not displayed.
OVER 100% 70 – 80%
85 – 95%
OVER 95% : Zebra pattern displayed in areas with a
OVER 100% : Zebra pattern displayed in areas with a
Memo:
When the MODE switch is set to VTR (VTR playback /DV
mode), this item is not displayed.
Adjusts the brightness of the LCD screen.
MAX
To brighten ... Make value higher
4
To dim ... Make value lower
Adjusts the colour saturation of the LCD screen.
1
● NORMAL
Higher colour saturation ..... Make value higher
Lower colour saturation ..... Make value lower
–1
Adjusts the contrast of the LCD screen.
–4
To make contours sharper ...Make value higher
MIN
To soften contours ... Make value lower
Adjusts the brightness of the viewfinder screen.
To brighten ...... Make value higher
To dim ............. Make value lower
Adjusts the colour saturation of the viewfinder screen.
Higher colour saturation ..... Make value higher
Lower colour saturation ..... Make value lower
Adjusts the contrast of the viewfinder screen.
To make contours sharper ....... Make value higher
To soften contours ................... Make value lower
The DISPLAY [2/2] menu screen returns when the SELECT dial
is pressed. (Menu screen for selecting display items)
The TOP MENU returns when the SELECT dial is pressed.
Set Value
Selects whether the remaining tape time indication should be
OFF shown on the LCD screen and the viewfinder screen.
ON : Displayed
OFF : Not displayed
Selects whether the time code should be shown on the LCD
OFF screen and the viewfinder screen.
ON : Displayed
OFF : Not displayed
Contents
: Zebra pattern displayed in areas with a luminance
level of 70% to 80%.
: Zebra pattern displayed in areas with a
luminance level of 85% to 95%.
luminance level above 95%.
luminance level above 100%.
Contents