Setting Up A Custom Icon Strip - SMART Notebook 10 User Manual

To set up the custom
icon strip
11 9 | CH A PT ER 19 – T H E S M A R T N O T E BO O K C O N T R O L P A N E L

Setting Up a Custom Icon Strip

If your SMART interactive product supports icon strips, you can set up a custom icon
strip. The custom icon strip enables you to quickly access your frequently used tools
by pressing the screen. You can position the custom icon strip on the left, right or
bottom edge of the interactive product inside the black border.
TIP
Make sure that the edge of the tool strip is aligned with the frame of the interactive
product.
1. Open the SMART Notebook control panel.
2. Press SMART Hardware Settings.
The upper area of the control panel displays an image of the SMART product
connected to the computer.
3. If your computer is connected to more than one SMART product, the upper area
of the control panel displays an image of each SMART product. Press the image
of the product with the settings you want to change.
4. Select Set Up Icon Strips in the list.
5. Press Add.
The Available Strips dialog box appears.
6. Select Custom Strip, and then press OK to display the calibration screen.
7. Follow the on-screen instructions to define the corners of the icon strip.
NOTE
If you press the interactive screen too far from the edge of the icon strip, an
error message appears and you must try again.
After you complete the calibration, a list of available tools appears. These
available tools are organized into four tabs: Launch, General, Tools and Display.
8. If you want to add a tool in the Available Tools list to the icon strip, press its icon,
and then press Add to move it to the Current Toolbar list.
If you want to add a program button to the icon strip that isn't included in the
Available Tools list, press Browse, select the program's executable file, and then
press Open.
If you want to add a link to a Web page to the icon strip, press Link to website,
type the Web address, and then press OK.
If you want to remove an icon from the Current Toolbar list, select the icon, and
then press Remove.