Changing The Video Output Arrangement - SMART Notebook 10 User Manual

To customize
Touch Recognition
To change the
video arrangement
11 6 | CH A PT ER 19 – T H E S M A R T N O T E BO O K C O N T R O L P A N E L
1. If you want to change how SMART Notebook interprets your intent when you
press the screen, press Touch Recognition Settings, and then move the sliders
as follows:
– If you move the left slider to the right, SMART Notebook interprets a wider
range of contact area sizes as an attempt to erase digital ink.
– If you move the right slider to the left, SMART Notebook interprets a wider
range of contact area sizes as an attempt to write or draw in digital ink.
SMART Notebook interprets every size of contact area between these two sliders
as an attempt to left-click.
NOTE
To reset Touch Recognition's default settings, press Defaults.
2. Pick up a pen tray pen, and then press in the square below the sliders using the
pen, your finger, and then your palm. If the Touch Recognition's sensitivity is
appropriate for your style of pressing the screen, you can write with the pen,
select with your finger and erase with your palm. If SMART Notebook
misinterprets your intent when you press the screen on any of these occasions,
adjust the sliders as detailed above.
3. Press OK to save your settings.
4. Press OK to close the control panel.

Changing the Video Output Arrangement

You can operate multiple SMART interactive products using the same computer. You
can split the computer's display over two or more interactive screens, or you can view
some programs and windows on one interactive screen and other program and
windows on another.
If you're splitting or stretching a computer image across multiple interactive screens,
you must change SMART hardware settings to customize the behavior of your
SMART products, including how you want to arrange the video output.
1. Open the SMART Notebook control panel.
2. Press SMART Hardware Settings.
3. Select Arrange Video Output in the list.
4. Select Override video output arrangement.