Choose Proper Parts For Your System; Central Processor Unit (Cpu) Considerations; System Memory Interface - Fujitsu D3118 Manual

12 – English

Choose Proper Parts for Your System

Before you installing a system with this motherboard, make sure your major system parts meet the
following basic guidelines and requirements:

Central Processor Unit (CPU) Considerations

●
Single/Dual Processor System
D3118 supports up to two Intel® Xeon® processors and up to 8 cores in one LGA2011 socket.
Single Processor System:
When only installing a single processor on D3118, the processor must be installed in the CPU0
socket.
Dual Processor System:
D3118 supports dual processor configurations only in which both processors operate with the
same QPI frequency, core frequency, and have the same internal cache sizes. Mixing
processors operating at different QPI frequency, core frequency, or cache sizes may cause
system non-operation or damages on processors and/or the motherboard.
●
Quick Path Interconnect (QPI)
The processor host bus, or called Quick Path Interconnect (QPI), auto-operates at a frequency
up to 8 GT/s.

System Memory Interface

●
Technology
DDR3 1066/1333/1666 unbuffered single rank or dual rank DIMM modules with or without ECC
Any combination of x8 UDIMMs, with 1Gb, 2Gb or 4Gb DRAM density supported.
DDR3 800/1066/1333/1600 registered single rank or dual rank DIMM modules with ECC.
DDR3 800/1066 registered quad rank DIMM modules with ECC.
●
Connector
240 Pin, 1.5 V, 64/72 Bit
50
Mainboard D3118
Fujitsu Technology Solutions