If any abnormal matter occurs during the measure-
ment such as the inflation does not stop, remove
the arm cuff or pull the air tube from the main unit.
• You may suffer peripheral neuropathy.
Requests from OMRON
• Be sure that the patient should not touch the unit.
• Be sure to monitor all the time that the unit and the patient
are not abnormal.
• Do not use the unit in a vehicle.
List of Measurement Modes
To measure
only once
To measure three
times
(or two times)
consecutively
To measure by
using a stetho-
scope
To confirm the
accuracy of pres-
sure display
14
How to Measure Blood Pressure
Warning
SINGLE Mode
AVG. Mode
MANU. Mode
CHECK Mode
Caution
In the following case, confirm the measure-
ment with the stethoscope.
(1) When an irregular pulse wave is displayed
· An error may be displayed when an external vibra-
tion is applied or the patient moves his/her body.
(2) When an error is generated or the measured
value is doubtful
· An error may be displayed when an external vibra-
tion is applied or the patient moves his/her body.
· An error may be generated in the measured value
or the blood pressure may not be able to measure
for the patient having peripheral circulatory distur-
bance or extreme hypotension.
· An error may be generated in the measured value
or the blood pressure may not be able to measure
for the patient having short variation of blood pres-
sure such as arrhythmia.
Do not use a portable phone near the unit.
• The unit may malfunction.
Refer to Page
15.
Refer to Page
16.
Refer to Page
17.
Refer to Page
18.