How To Measure Blood Pressure; Single Mode; Avg. Mode; Manu. Mode - Omron HEM907KIT Instruction Manual

HEM-907-C3_D_M.fm Page 18 Wednesday, July 4, 2018 12:11 PM

How to Measure Blood Pressure

If any abnormal matter occurs during the
measurement such as inflation does not stop,
remove the cuff or pull out the air tube from the
main unit.
• You may suffer peripheral neuropathy.
General advice
• Be sure that the patient should not touch the unit.
List of Measurement Modes
To measure
only once
To measure two
times
(or three times)
automatically and
consecutively
To measure by
using a
stethoscope
To check the
accuracy of
pressure display
Warning

SINGLE Mode

AVG. Mode

MANU. Mode

CHECK Mode
Caution
In the following cases, check the readings with
the stethoscope.
(1) When an irregular pulse wave is displayed
• The reading may be erroneous due to
external vibration or patient's body
movement.
(2) When erroneous reading takes place or the
measured value is doubtful
• The reading may be erroneous due to
external vibration or patient's body
movement.
• An error may have occurred during
measurement or when measurement is not
possible for patient who has peripheral
circulatory disturbance or extreme
hypotension.
• An error may have occured due to extreme
short variation of blood pressure such as
arrhythmia.
During measurement, make sure that no
mobile phone or any other electrical units that
emit electromagnetic fields is within 30 cm of
this monitor.
• It may result in incorrect operation of the
monitor and/or cause an inaccurate reading.
Do not use this unit in a vehicle.
• It may result in erroneous measurement.
Refer to Page
18
.
Refer to Page
20
.
Refer to Page
22
.
Refer to Page
24
.
18