How to Measure Blood Pressure
1.
Wrap the arm cuff over the
patient's arm.
3.
Set the MODE Selector to
"SINGLE".
5.
Push the START Button to start
the measurement.
• If the inflation is determined
insufficient, the unit may start
inflation again automatically.
• If you want to stop measure-
ment, push the STOP Button.
The unit deflates fast.
7.
Push the ON/OFF (power)
Button to turn off the power.
2.
4.
ON/OFF
START
HIDE
P-SET
MODE
SINGLE
140
180
AVG.
MANU.
220
CHECK
100
STOP
260
AUTO
280
6.
ON/OFF
START
HIDE
P-SET
MODE
SINGLE
140
180
AVG.
MANU.
220
CHECK
100
STOP
260
280
AUTO
ON/OFF
START
HIDE
P-SET
MODE
SINGLE
140
180
AVG.
MANU.
220
100
CHECK
STOP
260
AUTO
280
(in SINGLE Mode)
Push the ON/OFF (power)
Button to turn on the power.
Set the P-SET (pressure set-
ting) Volume to "AUTO" or the
target inflation value.
• When setting the P-SET to
"AUTO", turn the Volume coun-
terclockwise as far as it goes
until you can hear the click
sound.
• When the systolic pressure is
expected to exceed 220 mmHg,
proper inflation may not be pos-
sible in "AUTO" setting.
Set the target inflation value to
30 to 40 mmHg higher than the
expected systolic pressure.
Measured results are
displayed.
ON/OFF
START
HIDE
P-SET
MODE
SINGLE
140
180
MANU.
AVG.
220
CHECK
100
STOP
260
AUTO
280
ON/OFF
START
HIDE
P-SET
MODE
SINGLE
140
180
AVG.
MANU.
220
CHECK
100
STOP
260
AUTO
280
SYS
mmHg
DIA
mmHg
PULSE
BPM
HIDE
15