Adding A Server To The Server List - Sun Microsystems Netscape Enterprise Server Administrator's Manual

Adding a Server to the Server List

When you add a server to a cluster, you specify its Enterprise Administration
Server and port number. If that Enterprise Administration Server contains
information about more than one server, all of its servers are added to the
cluster. (You can remove the individual servers later.)
If a remote Enterprise Administration Server contains information about a
Note
cluster, the servers in the remote cluster are not added. The master Enterprise
Administration Server adds only those servers that are physically installed on
the remote computer.
To add a remote server to the list, perform the following steps:
1.
2.
3.
4.
5.
6.
Access the Enterprise Administration Server and choose the Cluster Mgmt
tab.
Click the Add Server link.
Choose the protocol that the remote Enterprise Administration Server uses.
This is the protocol used when contacting the remote Enterprise
Administration Server. Choose http for normal Enterprise Administration
Server. Choose https if the remote Enterprise Administration Server is
secure.
Type the hostname for the remote Enterprise Administration Server. If your
DNS can resolve host names, you don't need to type the fully qualified
domain name; otherwise type the full host and domain name. For example,
type www.mozilla.com.
Type the port number that the remote Enterprise Administration Server
uses.
Click OK.
The master Enterprise Administration Server attempts to contact the remote
server. When it succeeds, the server identifiers appear on the form for every
server installed on the remote administration server. If you have two or
more servers on different computers that use the same identifier, the form
shows the server identifier and the hostname for the computer. If both
Adding a Server to the Server List
Chapter 6, Managing Server Clusters 153