System Configuration; Channel Search; Edit Satellites - Nokia MEDIAMASTER 9902 S Owner's Manual

MAIN MENU

System configuration

You will be asked to enter your access code before you can en-
ter this menu. The code is preset to 1234 from the factory.
(The code can be changed from the Parental control menu. Re-
fer to page 50.)
If you want to customize the system to suit you better, you can
specify some settings from the submenus in the "System con-
figuration" menu.
Please note that many of these functions are the same as in the
"First time installation."

Channel search

The procedure is the same as performed during the First Time In-
stallation. Please refer to page 18-19.

Edit satellites

When a new satellite has been sent into orbit, or if you select a
not preprogrammed satellite, you can add it to the existing sat-
ellite list.
To add a new satellite
• Select the line "New satellite".
• Press OK.
• Enter the name of the new satellite. (How to enter a name is
described on page 41.)
• Enter the position (in degrees) with the numeric buttons on the
remote control. (Use the left arrow button to erase digits.)
• Select orientation; East or West.
• Press OK to save these settings.
Before you can watch channels from that new satellite you must
also carry out the following steps:
For a fixed antenna:
• Select "Antenna/Satellite configuration" in the "System con-
figuration" menu.
• Follow the instructions on page 15. From the menu "Antenna
adjustment" select the new satellite name.
GB 45