Editing Key Pairs And Server Certificates - Canon imageRunner 6570 Network Manual

8
9
10
3
11
The procedure for registering the key pair and server certificate is complete.

Editing Key Pairs and Server Certificates

You can confirm the settings of registered key pairs and server certificates. You can
also erase unnecessary key pairs and server certificates, and set the default key
pair. The key pair set as the default key pair is used for SSL communication.
1
2
3
3-34
Protocol Settings
Press [Done].
The display returns to the Certificate Settings screen.
Press [Done].
The display returns to the TCP/IP Settings screen.
Press [Done] repeatedly until the Additional Functions screen
closes.
Restart the machine.
❑
Turn OFF the machine, wait at least 10 seconds, and then turn it ON.
NOTE
For instructions on how to turn ON/OFF the machine, see Chapter 1, "Before You
Start Using This Machine," in the Reference Guide.
(Additional Functions) ➞ [System Settings] ➞
Press
[Network Settings].
Press [TCP/IP Settings].
The TCP/IP Settings screen is displayed.
Press [▼] or [▲] until [Certificate Settings] appears ➞ press
[Certificate Settings].
The Certificate Settings screen is displayed.