Windows 2000/Xp/Server 2003 - Canon imageRunner 6570 Network Manual

Windows 2000/XP/Server 2003

NOTE
By installing Canon LPR2, you can also set IPP. Canon LPR2 enables you to set ports
easily. For more information, see Chapter 1, "Using Canon LPR2," in the Canon LPR2
User's Guide (PDF manual). For instructions on how to display the Canon LPR2 User's
Guide, see the Network Quick Start Guide.
1
Check the settings for <RX/Print Range> in [IP Address Range
Settings] to see whether the IP address of the computer in
which a driver is to be installed is permitted.
IMPORTANT
•
If the settings for <RX/Print Range> in [IP Address Range Settings] do not permit
the IP address, you cannot install a driver.
•
If the IP address of the computer is beyond the range of the permitted addresses
set for <RX/Print Range> after installing a driver, you cannot print from the
computer.
NOTE
For details, see step 22 in "TCP/IP Settings," on p. 3-4.
2
Start the Add Printer Wizard.
● If you are using Windows 2000:
❑
On the [Start] menu, point to [Settings] ➞ click [Printers].
❑
Double-click the [Add Printer] icon.
● If you are using Windows XP Professional:
❑
On the [Start] menu, click [Printers and Faxes].
❑
In the [Printer Tasks] menu, click [Add a printer].
● If you are using Windows XP Home Edition:
❑
On the [Start] menu, click [Control Panel].
❑
Click [Printers and Other Hardware] ➞ click [Printers and Faxes].
❑
In the [Printer Tasks] menu, click [Add a printer].
Setting Up a Computer for Printing/Sending a Fax (Windows/UNIX)
3
3-67