Canon imageRunner 6570 Network Manual page 66

3
3-20
Protocol Settings
The display returns to the IP Address Range Settings screen.
❑
Press [Reject IP Address(es)] for <RX/Print Range>.
❑
Press [Off] for <Apply Settings> ➞ press [OK].
The display returns to the IP Address Range Settings screen.
● If you want to restrict the IP addresses of computers from which
data (print/fax/I-fax job) can be sent to the machine:
❑
On the TCP/IP Settings screen, press [▼] or [▲] until [IP Address Range
Settings] appears ➞ press [IP Address Range Settings].
❑
Press [Permit IP Address(es)] for <RX/Print Range>.
❑
Press [On] for <Apply Settings> ➞ press [Register].
❑
If you want to store only one IP address, press [Single Address] ➞ enter the IP
address that is to be permitted using
(numeric keys) ➞ press [OK].
-