Canon imageRunner 6570 Network Manual page 61

IMPORTANT
In order to select [On] for <Use SSL> to allow SSL communication, a key pair is
necessary. You can use the preinstalled default key pair, or generate an original key
pair with the machine, to use as the default key pair. For information on the default
key pair, and instructions on how to generate an original key pair, see "Generating
a Key Pair and Server Certificate," on p. 3-28.
❑
If you are using IPP authentication, press [On] for <Use Authentication> ➞
enter the user name to use for IPP authentication in [User], and the password
to use for IPP authentication in [Password].
❑
Confirm the settings you specified ➞ press [OK].
The display returns to the TCP/IP Settings screen.
● If you do not want to use IPP as the print application:
❑
On the TCP/IP Settings screen, press [▼] or [▲] until [IPP Settings] appears ➞
press [IPP Settings].
❑
Press [Off].
❑
Confirm the settings you specified ➞ press [OK].
The display returns to the TCP/IP Settings screen.
19
Specify the Multicast Discovery settings.
● If you want to use device information from other devices, such as an
Address Book or Department ID Management settings, or if you
want to respond to a multicast discovery from utilities:
❑
On the TCP/IP Settings screen, press [▼] or [▲] until [Multicast Discovery]
appears ➞ press [Multicast Discovery].
❑
Press [On] for <Response>.
3-15
Protocol Settings
3