Canon imageRunner 6570 Network Manual page 97

3
Set the time period required to delay the startup of network
communications for the machine.
Press [-] or [+] to set the time period.
4
Confirm the settings you specified ➞ press [OK].
The display returns to the Network Settings screen.
5
Press [Done] repeatedly until the Additional Functions screen
closes.
6
Restart the machine.
❑
Turn OFF the machine, wait at least 10 seconds, and then turn it ON.
NOTE
For instructions on how to turn ON/OFF the machine, see Chapter 1, "Before You
Start Using This Machine," in the Reference Guide.
The startup time settings are complete.
3-51
Protocol Settings
3