Table of Contents
Advertisement
2.2
POSITIONING AND LOCATION OF THE MACHINE
Place the machine on a firm, dry and level surface. Where possible, do not allow dust or other
impurities to enter the machines cooling air flow. Preferably site the machine above floor level;
for example on a suitable carriage unit.
Notes for positioning the machine
• The surface inclination should not exceed 15 degrees.
• Ensure the free circulation of the cooling air. There must be at least 20 cm of free space in
front of and behind the machine for cooling air to circulate.
• Protect the machine against heavy rain and direct sunshine.
The machine should not be operated in the rain as the protection class of the machine,
NOTE!
IP23S, allows for outside preserving and storage only.
Never use a wet welding machine.
NOTE!
Never aim metallic grinding spray/sparks towards the equipment.
NOTE!
2.3
DISTRIBUTION NETWORK
All regular electrical devices without special circuits generate harmonic currents into
distribution network. High rates of harmonic current may cause losses and disturbance to
some equipment.
MinarcMig Evo 200 complies with IEC 61000-3-12.
2.4
SERIAL NUMBER
The serial number of the unit is marked on the rating plate. The serial number makes it
possible to trace product manufacturing series. You might need the serial number when
placing spare parts orders or when planning maintenance.
2.5
GENERAL VIEW OF THE MACHINE
5.
4.
1.
Supply voltage cable
2.
Main switch
3.
Shielding gas hose connector
4.
Welding gun and cable
5.
Earth return clamp and cable
EN
2.
3.
1.
5
Hide quick links:
Advertisement
Table of Contents
